Sensor Holder for KG PVC pipe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sensor holder specifically designed to fit into a KG PVC pipe
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Story: We needed to insert a water level sensor into a DN 110 KG PVC pipe for a project. Therefore, I have designed a holder that can hold such a sensor and perfectly aligns with the inner shape of the pipe. You need to drill a hole (approximately 4,5mm) and use M4 screws and nuts to attach the holder to the pipe.
I have used PETG but you can also use PLA, ABS and ASA filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| eSUN PLA+ | Amazon |
| Anycubic PLA | Amazon |
PETG | |
| Eryone PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| Elegoo Rapid PETG | Amazon |
ABS | |
| Amazon Basics ABS | Amazon |
| Creality ABS | Amazon |
| OVERTURE ABS | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks!