KTM Husqvarna Gas Gas Oil Drain Pipe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Oil drain pipe for engine oil changes
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 478
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Oil drain pipe for doing oil changes in KTM, Husqvarna or Gas Gas motorcycles (or anything with a M12 x 1.5mm oil drain bolt thread). To use, lay bike on side, remove drain plug, screw in drain pipe (I put a plug in the end of the pipe), stand bike back up (remove rubber plug from end of pipe) and easily catch oil in a pan. Saves from having to remove skid plates to do oil changes. I'd recommend using a bungie cord or similar to hold up shifter lever if you have a lever that contacts the pipe to prevent damage to pipe. I printed mine with thread end up with brim and had no problems.