KG Pipe Lid for Sensors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
KG pipe lid designed for different kinds of sensors including a screws for cables
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Story: We needed to insert different water level sensors into a DN 110 KG PVC pipe (see sensor-holder-for-kg-pvc-pipe) and wanted to organise but also protect them. Thats why I have designed a lid which covers most of the top of the pipe and offers a thread and screw to organise the cables of the sensors. This sensor perfectly fits through the hole of the lid.
No supports needed! I have used PETG, but you can also use PLA, ABS and ASA filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| eSUN PLA+ | Amazon |
| Anycubic PLA | Amazon |
PETG | |
| Eryone PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| Elegoo Rapid PETG | Amazon |
ABS | |
| Amazon Basics ABS | Amazon |
| Creality ABS | Amazon |
| OVERTURE ABS | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks!