Detroiters Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Standard Digital File License
This is a great decoration perfect for Detroiters fans who want to commemorate the comedy masterpiece that Comedy Central canceled way too soon. I added some magnet tape to the back of mine for easy display—because it deserves to be seen!
- Size: 200x90.61mm
- Infill: 100%
- Layer Height: 0.08mm, Base Layer: 0.2mm
- Filament Usage: 16.37g
- Print Time: 1h 15m
Filaments:
- Bambulab Matte Charcoal (0.6 TD)
- Bambulab Basic Turquoise (1.6 TD)
- Bambulab Basic Jade White (5.5 TD)
- Bambulab Basic Pumpkin Orange (4 TD)
Swap Instructions:
1 Start with Charcoal
2 Layer 5 (0.52mm) – Swap to Turquoise
3 Layer 7 (0.68mm) – Swap to Jade White
4 Layer 9 (0.84mm) – Swap back to Charcoal
5 Layer 11 (1mm) – Swap to Pumpkin Orange
Important Warning:
The HueForge preset I’m using turns all fans off. If you're printing in an enclosed space, either leave the door/top slightly open to allow airflow or manually turn the fans back on to avoid overheating your printer.
Notes: Use exact or similar filament colors with comparable transmission distances.