Sign Clip for Cardboard Mailing Tubes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of clips that attach a sign to a cardboard mailing tube. Snap the clips onto the tube, tape the sign to the clips
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 2
- Wyświetlenia
- 66
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
So you've made a sign and want to hold it in the air - now what? Do you tape it to a stick? Hold it in your arms? This is a better idea.
It's built in OpenScad and parameterized so you can easily change the diameter of the tube, the length of the wings for taping the sign to, thickness, etc.
Get a cardboard mailing tube (the ones I use are 55mm across, about a meter long)
Print these clips - I did a plate with two clips and an end piece so the sign won't slide down the tube.
Snap the clips on the tube - they stay in place, won't go anywhere.
Tape your sign to the flat part - works super well!