BLV MGN Cube TopHat Enclosure, Extrusion Covers, Panels, and Rigid Mounting Bracket

This extrusion cover is designed to conceal the Metal kit parts, allowing the tophat to be placed on top as an enclosure. The included Rigid Bracket Mount will help the printer decrease vibrations by securing the tophat to the main frame; print 4 and mount 2 on each side of the printer. I used button head M5 screws along with M5 T Slot nuts.

I have included the STEP files, a photo showing the Tophat frame dimensions, and the Illustrator file I used to cut my acrylic panels. The extrusions used were 2020 and 2040. If you don't want to use 2040s, use this as a guide and make adjustments. TopHat extrusions were cut using a miter saw with a metal cutting blade; be careful if doing it yourself, and wear protection. Some extrusions were tapped to allow the ends to be connected.

For clarification regarding the photo with dimensions: 

H = 2020 extrusion, H2 = 2040 extrusion

I used a drilling jig to cut holes towards the length ends.

https://www.printables.com/model/387902-2020-v-slot-drill-cutting-jigs/comments

I used 5mm Sponge EVA Adhesive Tape Single Side Foam Anti-Collision Seal Strip, along the edge of the panels.

Acrylic panels are held together using Annex Engineering panel clips.  

https://github.com/Annex-Engineering/Annex-Engineering_User_Mods/tree/main/Printers/All_Printers/annex_dev-Panel_2020_Clips_and_Hinges

The hinges and doors are the Voron Magnetic Door Hinges (Enhanced) by SBui

https://www.printables.com/model/899914-voron-magnetic-door-hinges-enhanced

The door handles are from the Voron 2.4 repository.

I also have a front in the style of a Voron-inspired design.

https://www.printables.com/model/809241-blv-mgn-cube-voron-style-front-panel

As a disclaimer, I am not liable for errors that may be found with the files. Use this as a guide resource and plan your build.