1 / 1
30mm M6 bolt and nut for 120mm Desk Fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a nut and bolt to make the 120mm Desk Fan completely construct with 3D printed part
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 368
- Wydruki
- 2
- Wyświetlenia
- 1105
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (44)Powiązane
Please print the bolt flat side down. It is normal to hear squeaking sound when tightening the nut and bolt. You may need two plier to install it.
Layer: 0.10 mm
Material: PETG recommended
Infill: 100%
Perimeters: 4