Zelda_Urbosa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Warriors of Hyrule! I'll make the posters for all warriors if you like them!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm learning to make animation posters and models, please provide your feedbacks and like it if you do! Really appreciate!
Project: Zelda_Urbosa.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 172x228mm in size and hexagonal shape
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA Bambu Black Transmission Distance: 0.1
PLA Bambu Brown Transmission Distance: 1.5
PLA Sunlu Red Transmission Distance: 4.1
PLA Sunlu Yellow Transmission Distance: 6
PLA Sunlu White Transmission Distance: 3.4
PLA Sunlu Pri-Cyan Transmission Distance: 0.1
PLA Bambu Blue Grey Transmission Distance: 2.4
This print uses 7 unique filaments, other brands of filaments with similar TD should work as well.
Swap Instructions:
Start with Black (Slot1 from left to right in AMS)
At layer #7 (0.64mm) swap to Brown (Slot2)
At layer #10 (0.88mm) swap to Red (Slot3)
At layer #12 (1.04mm) swap to Yellow (Slot4)
Pause at layer #13 to allow color swap for slot 1, 2 and 3
At layer #14 (1.2mm) swap to White (Slot1)
At layer #18 (1.52mm) swap to Pri-Cyan (Slot2)
At layer #19 (1.6mm) swap to Blue Grey (Slot3)
At layer #21 (1.76mm) swap to White for the rest.