SailorMoon_Collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm learning to make animation posters and models, please provide your feedbacks or like it if you do! Really appreciate!
Project: SailorMoon_Collection.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200.03x149.34mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA 3DHoJor Black Transmission Distance: 0.1
PLA 3DHoJor Blue Transmission Distance: 2.9
PLA Sunlu White Transmission Distance: 5.9
PLA Sunlu Yellow Transmission Distance: 6
PLA Sunlu Red Transmission Distance: 4.1
PLA Sunlu Misletoe Green Transmission Distance: 4
PLA Bambu Brown Transmission Distance: 2
PLA Sunlu Pri-Cyan Transmission Distance: 0.1
This print uses 8 unique filaments
Other brands of filaments with similar TD should work as well.
Swap Instructions:
Start with Black (Slot1 from left to right in AMS)
At layer #6 (0.56mm) swap to Blue (Slot2)
At layer #8 (0.72mm) swap to White (Slot3)
At layer #10 (0.88mm) swap to Yellow (Slot4)
pause at layer #14 to allow color swap for slot 1, 2 and 3
At layer #15 (1.28mm) swap to Red (Slot1)
At layer #19 (1.6mm) swap to Misletoe Green (Slot2)
At layer #22 (1.84mm) swap to Brown (Slot3)
pause at layer #14 to allow color swap for slot 4 and 1
At layer #25 (2.08mm) swap to Pri-Cyan (Slot4)
At layer #26 (2.16mm) swap to White for the rest.