E3D V6 mount for Ender 3 w/ BL Touch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a E3D V6 hotend mount for an Ender 3. This adds a second cooling fan and can take a BL Touch.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 388
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This was optimized for rigidity, by doing so the build plate is reduced by 5-10mm in the X axis. I also added an additional 4010 turbofan for added cooling as I am running this printer at fast speeds. If you are running a slower printing speed the original Ender 3 fan may be enough.
Hardware Required from stock Ender 3
BTT V3 E2 Mainboard (not required but thought I would note it as it's what I am using)
E3D V6 Hotend
BL Touch (probe offset: X = -42, Y = 14.15)
Additional 4010 Turbo Fan
Hardware:
- M3 Heat Set inserts QTY:4
- M3 x 8mm QTY:10
- M3 x 12mm QTY:2
- M3 x 16mm QTY:2
- M3 x 6mm QTY:4
Printed PETG Components (6 total):
- Left and right fan shroud
- Left and right fan mounting plates
- Heat sink clamp
- V5 mount