Toyota Yaris sun visor with navigation (phone)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This uses the swivel harvested from the original sunvisor.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
This model uses the swivel part taken out of a sunvisor from a Toyota Yaris 2001. I have cut apart the original and used the part to hold the new one in place in the car. I had to cut off most of the steel wire holding the original sunvisor in place. The original is made of cardboard inside so it needs the rigidity from the steel wire. The plastic one does not.
The front plate can be adjusted based on phone model. Right now it fits an S21ultra which has otherwise been collecting dust in a drawer.
You will need 4 M3x5x6mm brass inserts to mount the frontplate and you'll need to manage a cable to power your phone. I have placed a 12v to 5v converter in the ceiling of the car and run the wire through there but that is up to preference.
The frontplate has a small slit so that you may reach the power button using a bank card or something.