Spindle extension-extension - Gustavsberg/Vatette/VA outdoor faucet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Four different Spindle extension-extensions for Gustavsberg/Vatette/VA outdoor faucet. 1988-2003 2003-
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Having trouble with a leaking hose bib?
Try these spindle extension adapters to check whether the pipe leading to the spindle extension is too short — unless the issue is suspected to lie with the valve cone gasket.
Four adapter sizes are included for testing: 1 mm, 1.5 mm, 2 mm, and 10 mm.
The 10 mm adapter can be trimmed to your desired length.
Note: You may scale the model to compensate for inaccuracies in your printer.
It is recommended to print the adapters using a water-resistant filament such as PETG or PP.
The adapter is inserted into the inner pipe section that connects to the valve cone. After that, the spindle extension pipe can be reinstalled.
⚠ Warning – For testing purposes only.
Do not overtighten the spindle during reassembly — this may damage it.
The designer accepts no responsibility for any damage caused. Use at your own risk.
By using this product, the user accepts full responsibility for any associated risks.
If in doubt, consult a qualified professional for troubleshooting and installation.
🛠 Mounting instructions are included — consult the pictures for guidance.