Heavy load cargoes in 1:87 H0 scale for flat goods wagons UIC type S.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are four different heavy load cargoes in 1:87 H0 scale for flat wagons UIC type S intended for a model train
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 288
- Wydruki
- 0
- Wyświetlenia
- 853
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have created four types of heavy load cargo for my Roco 6600016 heavy load wagons UIC type S (not included in the models).
The cargoes are:
- A 'Stork Superior' Diesel engine. The Superior 40C-LX-8 is the prime mover of the NS 2200-class locomotive.
- A closed cargobox.
- A cargobox with some space between the planks so you can see the cargo inside. ;)
- A small cargobox (I placed a set on a Piko 54318 flat wagon UIC type LW).
I have printed the 'Superior' diesel engine with a 0.25 mm nozzle, although it can probably be printed with the 0.40 mm nozzle.
All other parts are printed with the 0.40 mm nozzle.
Closed cargo box:
- Closed cargobox bottom.stl
- Closed cargobox long side.stl
- Closed cargobox short side.stl
- Closed cargobox top.stl
Open cargo box:
- Open cargobox bottom.stl
- Open cargobox long side.stl
- Open cargobox short side.stl
- Open cargobox top.stl
- Open cargobox content.stl
Small cargo box:
- Small cargobox bottom.stl
- Small cargobox long side.stl
- Small cargobox short side.stl
- Small cargobox top.stl
Superior engine:
- Superior.stl
- Superior bottom.stl
Update:
I have added a rotor of a big industrial HEEMAF electric motor.
All parts of the rotor stand and the two halves of the rotor itself are printed with a 0.25 mm nozzle.
Make sure to align the notches in the center hole for the driveshaft when glueing together the two rotor halves.
Rotor stand:
- Rotor stand left.stl
- Rotor stand right.stl
- Rotor stand cross.stl
- Rotor stand frame.stl
Rotor:
- RotorA.stl
- RotorB.stl
Happy printing.