1 / 5
Air intake to carb boot DOHC 1983 Yamaha XS400 Maxim — zdjęcie 1
1 / 5

Air intake to carb boot DOHC 1983 Yamaha XS400 Maxim

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Air intake to carb boot for DOHC 1983 Yamaha XS400 Maxim. Designed to fit between stock Mikuni BS34 carb and stock air…

Ocena
0 / 5
Polubienia
0
Pobrania
21
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Air intake to carb boot for DOHC 1983 Yamaha XS400 Maxim. Designed to fit between stock Mikuni BS34 carb and stock air box. Made to use the stock clamp on the carb side. Inside diameter of the carb side is 55mm. Does not include the ridges in the middle of the boot like the stock boot. Not sure if they're needed and they always seemed like more trouble to me.

Printed in TPU, I was able to squeeze the boot together and fit it into the air intake box after removing the seat, gas tank and air box bolts that hold it to the frame. On my bike, this is easier than moving the carb. Print with the carb side up with no supports. Recommend using "avoid crossing wall" setting from Orca slicer or similar in your slicer.

Longevity and durability TBD. I don't know how long this will last.

Design still in progress - v5 is being uploaded on Apr 6, 2025

Category: Automotive

Tagi