3D printed webcam using IMX179 camera module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model allows an IMX179 USB camera module to be used as a web camera, by mounting it to the top of your monitor.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 91
- Wydruki
- 2
- Wyświetlenia
- 421
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
This model allows an IMX179 USB camera module to be used as a web camera, by mounting it to the top of your monitor.
This module has an extremely good image quality for a low price - a comparable factory-made webcam would cost at least 5x more. It also includes a microphone, just like any normal webcam.
My design uses a slightly modified AngryCam V2 case, originally intended to be used in 3D printers.
The 78° FOV version of the IMX179 module is recommended, since 120° is too wide for a webcam (your face will occupy only a tiny part of the camera view).
The camera bracket is attached to the top of your monitor with VHB tape.
No depinning is required during assembly.
The attached STEP file contains 7 parts total. Correct print orientation is shown below:
