Bat Wings for Laced Shoes - Indestructible!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wing pair to weave into your shoelaces for a fun accessory. If printed with TPU, they are extremely durable!
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 144
- Wydruki
- 0
- Wyświetlenia
- 672
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Public Domain
Print one pair of wings for one set of shoes, or print two pairs if you want each shoe to have a full set of wings.
This makes a great candidate for plates with effects such as PEY, H1H, PEO, etc.
TPU sticks handily to the aforementioned plates and I highly recommend it for this print. Make sure your filament is DRY for good results.
I printed at 100% infill, but I am not sure if this is necessary.
If using a different filament such as Silk PLA, a light coat of hairspray works great for adhesion to these special holo plates and will still capture the surface design.
The wings are 2mm thick but feel free to increase or decrease this Z value.
The spacing and size of the holes are standard.
*The low profile wings are smaller and more compact if you want something more subtle*