Kiwi's QIDI Q1P 3kg Spool Holder Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original spool holder by @Groskiwidu63_1300968. I've extended both the support shaft and roll shaft to fit 3kg spools.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modification and slicing done with OrcaSlicer. I printed these with PolyTerra PLA, nozzle temp 205c, bed temp 60c. It's recommended that you tune and calibrate your printer first before printing this. Printed with stock Q1P.
Print Settings used:
- Layer height: 0.28
- Wall loops: 5
- Top & Bottom shell layers: 3
- Infill: 10%
- Infill pattern: Adaptive Cubic
- Support: Tree(auto)
- Support style: Default(organic)
- Skirts off
- Brim auto
- Outer & Inner wall speed: 200m/s
- Support speed: 150m/s
Yes, the base didn't fit the QIDI spool holder adapter like the original iteration. However, I was able to convince it to fit by hitting it against a hard surface. You might be able to find success with this method if you don't want to take out the sandpaper.
I included an extension piece so there's enough clearance for riser mod if you have one. The mesh is a little broken and I don't know how to fix it, so it's included as an 3mf instead of STL. You should be able to slice and print without trouble.
This holder will wobble/slight flex during prints. You can try stabilizing it by more mounting screws to the frame, or design a separate support that goes on the other end of the roll shaft. Happy printing :)