Dillon XL650 Shellplate Holder / Organizer

Summary

This is a remix from AZJAKE who made the orginal.

Original here
https://www.thingiverse.com/thing:4128435

AZJAKE:
https://www.thingiverse.com/AzJake/about

I made this to hold every shellplate possible as of March 2020.

For XL650/750 Shellplates.

They are labeled for each shellplate.

I made the screw holes to work with the 50lb plastic anchors screws from homedepot or lowes. (E-Z Ancor #25350)

THIS IS A LONG PRINT. You will need a full roll of plastic. I recommend using a 0.6 nozzle to keep as a 1 day print. .4 nozzle will be about 1.5 - 2 day print.

I used prusa slicer with gyroid infill. Keeps print time with a 0.6 nozzle at about 22hrs. I used .3 Resolution but you can go more or less to get shorter print time or better detail. At .3, it looked very nice.

I forgot to put a brim on in my slicer, you may want to because it will lift on the corners.

Print Settings

• Printer brand:

Prusa

• Printer:

I3 MK3S

• Rafts:

No

• Supports:

No

• Resolution:

.3 with (0.6 Nozzle)

• Infill:

15% Gyroid

• Notes:

22HR PRINT