Voron 0.2 Toolhead PCB Mount for Picobilical Dragonburner - LDO Orbiter V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Picobilical toolhead PCB mount with holes for an LDO Orbiter on Voron 0.2r1 with original metal standoffs from LDO Kit.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I was struggling to find a version of the PCB toolhead mount that worked well for the LDO Orbiter V2 due to the fact that the pancake stepper is rotated 30 degrees. I remixed the original file from LDO to include a mount with the correct rotation and also to incorporate two heatset inserts since you can no longer screw the board into the metal standoffs.
Hardware Required:
2 M3 Heatset Inserts
2 M3x6 Screws
2 M3x8 Screws
Also the original angled spacers from the LDO Voron 0.2 Kit are still needed to hold the PCB in at the right angle.