Nozzle Cleaner for Ender 3 V3 SE (Klipper macro + instruction)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle Cleaner for Ender 3 V3 SE (Klipper macro + instruction)
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 227
- Wydruki
- 3
- Wyświetlenia
- 2272
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an improved version of the Nozzle Cleaner for the Ender 3 V3 SE (A1/A1 mini combs), optimized for easier use and compatibility with Klipper firmware. This cleaner works efficiently with silicone combs to maintain a clean nozzle during prints.
🧽This macro is designed to clean the nozzle using a silicone comb. It uses a center-based approach, followed by a zigzag motion to ensure thorough cleaning.
🖨 Print settings:
🔷Material: PETG
🔷Layer height: 0.2 mm
🚀! No supports required
🤖Install the Macro:
✅Copy the WIPE macro into your marco.cfg file on Klipper.
[gcode_macro WIPE]
description: Wipe nozzle on silicone comb (center-based + zigzag)Comb parameters
variable_comb_x: 138.0 ; X center of the comb
variable_comb_y: -12.3 ; Y center of the comb
variable_comb_z: 3.18 ; Z when touching the comb
General parameters
variable_comb_z_lift: 5.0 ; Nozzle lift before/after wiping
variable_comb_width: 40.0 ; Full width of the comb (mm)
variable_comb_cycles_1: 4 ; Number of cycles in the first pass
variable_comb_cycles_2: 3 ; Number of zigzags in the second pass
variable_comb_offset_y: 1.0 ; Y offset for the second pass
variable_comb_zigzag_shift: 1.5 ; X shift for each zigzag step
Return to specified position
variable_return_x: 100.0
variable_return_y: 20.0
gcode:
{% set half_width = comb_width / 2 %}
{% set zigzag_shift = comb_zigzag_shift %}
G90 ; Absolute coordinates
G1 Z{comb_z_lift} F3000 ; Lift nozzle before moving
G1 X{comb_x} Y{comb_y} F6000 ; Center of the comb
G1 Z{comb_z} F3000 ; Contact with the comb
; First straight pass
G91 ; Relative coordinates
{% for i in range(comb_cycles_1) %}
G1 X{half_width} F4500
G1 X-{half_width * 2} F4500
G1 X{half_width} F4500
{% endfor %}
; Lift slightly and move Y offset
G1 Z0.3 Y{comb_offset_y} F3000
; Second pass — zigzag along X with a slight shift
{% for i in range(comb_cycles_2) %}
G1 X{half_width + (zigzag_shift * i)} F4500
G1 X-{(half_width + (zigzag_shift * i)) * 2} F4500
G1 X{half_width + (zigzag_shift * i)} F4500
{% endfor %}
; Lift and return
G90
G1 Z{comb_z_lift} F3000
G1 X{return_x} Y{return_y} F6000
G4 P500</code></pre><p> </p><p>📝Adjust the parameters, such as the comb's center (<code>comb_x</code>, <code>comb_y</code>) and width, based on your specific setup.</p><p>✅Go to center comb</p><figure class="image image-style-align-center image_resized" style="width:34.1%;"><img src="https://media.printables.com/media/prints/1257392/rich_content/ead92147-6f49-4e42-85a3-b363cd980846/image.png#%7B%22uuid%22%3A%229a8522b5-5780-4050-ab3c-dd2e9d4c003f%22%2C%22w%22%3A1280%2C%22h%22%3A960%7D"></figure><p>✅look at the coordinates in the klipper</p><figure class="image image_resized" style="width:45.81%;"><img src="https://media.printables.com/media/prints/1257392/rich_content/4ed862b3-b42c-42ed-a0f6-bcb3ec0c3755/screenshot_17.jpg#%7B%22uuid%22%3A%2281333db5-950f-4396-ba41-60dd86740285%22%2C%22w%22%3A514%2C%22h%22%3A263%7D"></figure><p>✅ write them into a macro</p><figure class="image image_resized" style="width:67.43%;"><img src="https://media.printables.com/media/prints/1257392/rich_content/d466596c-8ea1-4cb3-9bc1-42f6aa9a5235/image.png#%7B%22uuid%22%3A%221214dec3-1665-4350-8bac-42209b6398cd%22%2C%22w%22%3A754%2C%22h%22%3A364%7D"></figure><p>✅add <strong>WIPE </strong>in your <code>PRINT_START</code></p><figure class="image image_resized" style="width:61.28%;"><img src="https://media.printables.com/media/prints/1257392/rich_content/c18457a5-e997-4b1d-a858-953a62161a65/screenshot_18.jpg#%7B%22uuid%22%3A%2206f2cf5a-3e3e-4c43-bb33-df180093fe7c%22%2C%22w%22%3A833%2C%22h%22%3A383%7D"></figure><p>🎉<strong>Congratulations</strong></p><p> </p><p>☕ If you like it, you can support me with a cup of ☕ at <a href="https://ko-fi.com/dm1trym">ko-fi.com/dm1trym</a></p><p> </p><blockquote><p><strong>Disclaimer</strong>: This nozzle cleaner and associated macros are provided as-is. The user assumes full responsibility for any damage or issues that may arise from using this design or code with their 3D printer. Always ensure proper calibration and testing before using with your machine.</p></blockquote>
