Paris travel poster - hueforge

Original design - Paris travel poster - hueforge
The photos shows the result in 200*150mm and a nozzle of 0.4

There are two versions using the same STL, black & white and color (red and blue but you can try with another color)

You can change the X and Y dimensions but do not change the Z dimensions  
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.  
You can use filaments other than those indicated, but the result will differ.  
You can use any black PLA

Hueforge description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.2mm

Black and White version

Filaments Used:
    PLA Black 
    PLA White Transmission Distance: 5
This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to White for the rest.

Color version

    PLA Black
    PLA White Transmission Distance: 5
    PLA Red or blue Transmission Distance: 4

This print uses 3 unique filaments

Swap Instructions:
    Start with Black

    At layer #7 (0.64mm) swap to Blue, red or any color you want
    At layer #8 (0.72mm) swap to White for the rest.