Adaptive Filament Canister Storage Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adaptive modular rack for the Filament Spool Storage Box V2.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adaptive modular rack for the Filament Spool Storage Box V2.
I use these storage containers instead of the cereal box containers (about $5 a canister with PETG). They were hard to manage when just on my printer desk alone. I've also been using them to learn and test a bunch of printing techniques while designing other models.
This modular rack set can be used in several configurations. It's fully printable, no external rods or glue needed. I use them as a carrying cases (handles at top and bottom) and to store the canisters for the filaments I’m currently working on at the desk. I also needed a shelf to store unopened refills and spool boxes, so I added a short extender to make it more of a universal / adaptive rack when needed.
My rack is current configured for (3 x 3 side by side)
Sample Configurations:
- Carrying case
- Stack-able floor and desk rack
- 2 x 2
- 3 x 3
- Top shelf with short extender.
Made with PETG and printed in .24 Draft mode. I printed them with PLA interface supports with a 0mm Top Z distance.
If you don't print with PLA interfaces you will need to return the Top Z distance back to the default .02mm and Top interface spacing back to 0.5mm.