1 / 8
Reolink Doorbell Mount with Peephole (10 Degree)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Peephole Doorbell mount
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My doorbell comes with a cable for power. I wanted to have it installed on the peephole. I came up with the extrude for the peephole through and got it on with the nut and remix the part. The part is 10 degrees to get a better view. It works perfectly.
Print setting:
0.15mm STRUCTURAL
Brim: yes, 0.35mm
Support: snug
Infill: yes, 15% gyroid
Speed: I get it down to around 10%
Orientation: Side (see the last picture)