Filament Clip - Mini Curved Version 4 (two variants) - IMPROVED AGAIN AGAIN!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Continuing my efforts to create the perfect filament clip.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 4
- Wyświetlenia
- 260
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
NOTE : Check for newer and better(?) versions of this clip by searching for “filament clip mini curved” :
https://www.prusaprinters.org/search/all?q=filament%20clip%20mini%20curved
NOTE 2 : My earlier versions of this clip worked pretty well, I think, but there is always room for improvement. My methodology is to continue to use the earlier versions as long as they do the job, and print the latest version when I need more of them.
This version of my filament clip has some subtle design differences which I hope will provide a couple of improvements :
- Better grip on filament reels over a wider range of rim thicknesses.
- Improved grip on the filament end.
As an experiment, I am also providing two variations of this new design, one with three “spring layers” and one with two layers (see photos).
Of course you can try both versions, but I seem to be getting good results with the two-layer version (which also prints faster).
Print Instructions
Print in PLA using the 3mf or gcode files provided. In general :
- perimeters = 4
- infill = 0%
- orient edge down on the build plate
I printed on a smooth plate and did not use a brim. I recommend not using a brim because it is a pain to remove.
CAD
The OnShape 3D CAD files for this are here :