1 / 11
Clamp holder for a 3018 CNC milling / engraving machine — zdjęcie 1
1 / 11

Clamp holder for a 3018 CNC milling / engraving machine

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clamp holder for a 3018 CNC milling / engraving machine Special clamp for screwing to the vertical side of the…

Ocena
0 / 5
Polubienia
32
Pobrania
198
Wydruki
0
Wyświetlenia
1253
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Clamp holder for a 3018 CNC milling / engraving machine

Special clamp for screwing to the vertical side of the aluminum profile
This is needed when there is no more space for clamping on the milling table

Attention
This clamp works only in the front, bump in the back :-)

You will find two different versions

You need long M5 screws or threaded rods and M5 nuts to melt (with soldering iron) into the handwheels and holders. M5 washer and one clamping block.

Saw off the head of the long M5 screw and glue the threaded rods with Loctite thread lock into the nuts.

Category: Machine Tools

Tagi