Buny Snek
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexi Bunny-Snake
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 412
- Wydruki
- 4
- Wyświetlenia
- 1273
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A Bunny head with 22 flexi snake segments (13 in short version)
Also in version with a hole in last segment (keyring) and with optional holes in head to be used with 4mm of filament as eyes
Original model is printed straight but if you want to print it as big as you can there is an Arc version (the same model but bended - wich uses more square space with more optimal way)
---
More Flexi models:
https://www.printables.com/@C47_3d/collections/1869277
---
Printing tips
2-3 walls
No infill needed unless you will resize the model
No supports needed
Good bed adhesion is needed. Brim is not recommended as you may need some time to remove it
Good cooling is recommended (connectors are with bridges)
You can resize it up as you like
Resizing down is not recommended but possible (with 0.4mm nozzle it should work even with 50% size but connectors will be much weaker). You may then use a Keyring version as an earring
Break possible connections between segments after print
With a clean print it will be moving like it should streight from the bed plate
---