1 / 8
Clamp holder for a 3018 CNC milling / engraving machine Ver.2 — zdjęcie 1
1 / 8

Clamp holder for a 3018 CNC milling / engraving machine Ver.2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clamp holder for a 3018 CNC milling / engraving machine You need two long M5 screws or threaded rods and four M5 nuts…

Ocena
0 / 5
Polubienia
40
Pobrania
270
Wydruki
0
Wyświetlenia
1291
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Clamp holder for a 3018 CNC milling / engraving machine

You need two long M5 screws or threaded rods and four M5 nuts to melt (with soldering iron) into the handwheels and holders. One M5 washer and one clamping block.

Saw off the head of the long M5 screw and glue the threaded rods with Loctite thread lock into the nuts.

With the rear screw you can adjust the height so that the holder is straight.

New, extended version 2 with 65mm length
Pressure plate to distribute the pressure on soft material.

Category: Machine Tools

Tagi