1 / 6
Clamp holder for a 3018 CNC milling / engraving machine
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp holder for a 3018 CNC milling / engraving machine You need a long M5 screw or threaded rod and M5 nut to melt…
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 362
- Wydruki
- 0
- Wyświetlenia
- 1312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (89)Powiązane
Clamp holder for a 3018 CNC milling / engraving machine
You need a long M5 screw or threaded rod and M5 nut to melt (with soldering iron) into the handwheel and a M5 washer
Saw off the head of the long M5 screw and glue the nut with Loctite threadlocker.
With the block you can adjust the height and the support is straight.
New, extended version with 65mm length
Category: Parts