1 / 4
Vibration damper for a 3018 CNC milling / engraving machine
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vibration damper for a 3018 CNC milling / engraving machine Take the 20mm thick foam from the packaging and cut it to…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 984
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (39)Powiązane
Vibration damper for a 3018 CNC milling / engraving machine
Take the 20mm thick foam from the packaging and cut it to fit.
This works very well.
You can also experiment with different types of foam rubber for optimal cushioning.
Cut the foam a little bit bigger so that it fits into the holder without glue.
Category: Parts