Command Strip Kitchen Utensil Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple utensil hanger using a wooden dowel
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
I wanted a way to hang some bulkier utensils in my kitchen without screwing into the wall. Most of the options I found here printed the whole rack, though - which would struggle to fit on my MINI, and seemed overkill when simpler solutions were available. So, I made this.
Uses a 7/16" wooden dowel (~11mm) between the two mounts. No glue, though you may need to scale the mounts up depending on your printers tolerance. I needed a mallet to get mine inserted - something like 105% scaling will be an easier fit.
Mounts using medium sized 3M Command strips.
The hooks aren't symmetrical - the side with the narrower opening snaps onto the dowel so it doesn't fall off.