1961 Ford Falcon Knobs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
These are replacement dash knobs for a 1961 Ford Falcon, although will likely fit other years/models. There are three versions included:
Threaded: For the pull knobs (eg, choke, headlights). You will need to run a die around the shafts to thread them. They are designed to work with M5 threads although may also work with a 3/16" thread. On my car the headlight switch was already threaded.
Twist with Insert: For the twist knobs (eg wipers, heater) if you still have your original knobs. There will be a knurled brass insert and grub screw inside the old knob. This file allows reuse of this sleeve. Destroy the old knob and press the brass sleeve in to the printed knob. Careful to keep the grub screw holes aligned!
Twist without insert: If you don't have your old knob and brass insert, this version is designed to work with an M3 grub screw that threads directly in to the knob.
Also included is a window crank knob that is designed to work with the original mounting pin and wave washer. Use a vice and a small socket against the pin head to press the pin in to the knob.