1 / 3
Ender 3 V2/Neo Feet - M3x20 Screws
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet to raise the printer, fixes to the bottom by using T slot nuts. Uses 20mm screws as they are more common.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These are feet to raise the printer, they are fixed to the bottom with two M3x20 screws and two T-Nuts per foot. M3 T-Nuts or just normal M3 nuts with a printed adapter can be used.