Qidi Plus 4 'Thicker Filament Holder'
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the Qidi 'thicker filament holder' that comes as gcode on the USB drive with the Qidi Plus 4.
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 362
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of the Qidi 'thicker filament holder' that comes as gcode on the USB drive with the Qidi Plus 4. I started with Michael's model as a guide and built up in CAD to get back to a clean solid model representation. I assumed this model existed on the Qidi website or wiki, but couldn't find it, just the g-code on the usb stick.
I wanted to print this out of ASA, not because this part needed it, but other parts in the batch needed higher temp material. I figured someone else might have a similar use for the 3d model.