1 / 7
K1/K1C/K1 SE Napkin Strip Saver for use with CFS Upgrade Kit – Nozzle Cleaner Mod — zdjęcie 1
1 / 7

K1/K1C/K1 SE Napkin Strip Saver for use with CFS Upgrade Kit – Nozzle Cleaner Mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easily swap bed plates on K1/K1C/K1 SE printers with the CFS upgrade kit installed – only 1 nozzle brush required

Ocena
5 / 5
Polubienia
217
Pobrania
1303
Wydruki
6
Wyświetlenia
5477
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Note: Must already have the new CFS firmware installed for the printer to use the new placement of the “napkin strip” (ver 2.3.5.xx).

This mod serves 2 purposes:

  • Takes out any guesswork for the correct placement of the nozzle brush/cleaner
  • Only requires 1 nozzle cleaner for multiple bed plates in any style, for easy swapping

It uses the official brush from Creality (hopefully they start selling replacements now), so you can reuse one from a K1C bed plate or the one included in the CFS upgrade kit

Designed with maximum clearance in mind for various exhaust fan mods

Highly recommended to print with a high temp filament like ABS or ASA (or better). My prototypes were printed in PLA-F (green) and it barely survived long enough to print the final in ASA (red).

This model does not work for the Max. Eric Sten made a remix that you can use https://www.printables.com/model/1286860-k1-max-napkin-strip-saver-for-use-with-cfs-upgrade

PS I don't know why it's called a napkin strip

Tagi