Phantom Skull – A HueForge Specter in 4 Shades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phantom Skull is my tribute to the legends, the myths, and that hauntingly satisfying moment when your HueForge layers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Dare to stare into the void?
Phantom Skull is my tribute to the legends, the myths, and that hauntingly satisfying moment when your HueForge layers line up just right. This spectral piece comes to life with only four filaments—bringing shadows, shine, and skeletal vibes to the forefront in a 200mm square of pure ghostly goodness.
👻 Project Info
File: crystal skull.hfp
Print Size: 200mm x 200mm
Print Infill: 100%
Layer Height: 0.08mm
Base Layer: 0.16mm
Base Thickness: 0.48mm
Max Allowed Thickness: 2.24mm
Actual Thickness: 2.22636mm
You can use a thicker layer height (like 0.12 or 0.16) for quicker prints, as long as you're below that 0.48mm base!
🎨 Filaments Used
🖤 #000000 – Sunlu Meta Black – Transmission Distance: 1
🩶 #777b78 – Sunlu Meta Grey – Transmission Distance: 3.5
💙 #006fd1 – Sunlu Matte Blue – Transmission Distance: 3
🤍 #ffffff – Sunlu Matte White – Transmission Distance: 5
🧠 Swap Instructions
Start with Black
At layer #11 (0.96mm), swap to Grey
At layer #17 (1.44mm), swap to Blue
At layer #21 (1.76mm), swap to White until completion
This one's got presence—haunting, mysterious, and just bold enough to make people say “Whoa, how did you print that!?”