[Remix] Moza SRP Pedal Faces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesign of maverickagm pedal faces for Mozas SRP Pedals. No supports, extra variation and blanks.
- Ocena
- 5 / 5
- Polubienia
- 167
- Pobrania
- 1635
- Wydruki
- 10
- Wyświetlenia
- 5822
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
[NOTICE]: I just added a new version with wider hole spacing for someone's SRP Lite. For others with SRP Lite those holes don't seem to work. Measure your own pedals to see which ones you have.
Modelled entirely myself, but mostly a direct copy in terms of dimensions. Throttle fills the entire pedal face now. I'm surprised how much grip the pattern gives.
Made with a maximum of 30deg overhangs for better print quality. No extra hardware needed.
Updates:
Added both wide and narrow variants for the flat and arrow pattern.
Added blanks
Added some versions with new SRP Lite spacing
Settings:
Higher temp and minimal cooling helps against warping
Infill: 12% rectilinear. Print slower for strength
Layer height: max. 0.2mm or adaptive
Line width: 0.6mm (0.4 nozzle)
Walls: 2-3 alternate extra (turn off 'print infill first' so it doesn't get knocked over as easily)
Support: Shouldn't be nessesary
Brim: mouse ears at least.