Deadpool - Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original design - Hueforge of Deadpool
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Standard Digital File License
Original design - Hueforge of Deadpool
The photos shows the result in 200*150mm and a nozzle of 0.4
You can change the X and Y dimensions but do not change the Z dimensions
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
You can use filaments other than those indicated, but the result will differ.
You can use any black PLA
Hueforge description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 149.69x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm
Filaments Used:
PLA Black
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Marron Red Transmission Distance: 1.3
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Jade White
At layer #11 (0.96mm) swap to Marron Red
At layer #13 (1.12mm) swap to Jade White for the rest.