Artillery Sidewinder X4 Extruder Cover Two sided Cooling V1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Re-idesigned the cover for better performance.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 364
- Wydruki
- 2
- Wyświetlenia
- 1008
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The original cover suffocates the extruder from air causing it to overheat overtime.
It does not use the 5015 blower fan to its full capabilities due to the poor airduct design.
My design allows the full hotend assembly to breathe and the extruder can get fresh air as the head moves on the X carriage.
The ducting for the fan allows to use it to its full potential, or later to be changed for a higher performance 5015 fan if needed.
This 2 ducterd design allows for even better cooling then my one sided one, but it now covers the nozzle.
There is two versions of the same ducting, one full box(covering the whole extruder/hotend assembly and one which is just to hold the fan in placewith two extra support legs.
I plan to add more designs, but it takes a lot of time to develop.
Update V1.1 22/04/2025:
Changed the cooling ducts design for better performance and a different type of side ventilation.
Printed from PLA, but it can be printed from what ever you like.
Filament: Esun Basic White PLA
Layer height: 0.2
Printspeed: 150mm/s
Nozzle: standard brass 0.4mm