1 / 1
Bauknecht Jetchef Premium Ersatzfuß / spare foot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was a simple replacement for Bauknecht Jetchef oven stand.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
A quick replacement that fits into the hole when one of the original stands break.
Printing
- Since it will be bearing a constant load and might warm up a little I would recommend to print it in PETG or a material with even higher tensile strength/impact resistance
- I put the foot vertically while printing to ensure a strong connection between the small insert on top and the base
- gyroid or grid infill with sufficient amount (~30%). I used a standard 0.4 Nozzle with a 0.2 layer height and the results were good.