1 / 5
BMW R1300GS Vario Side Pannier strap eyelet replacement with skidpads — zdjęcie 1
1 / 5

BMW R1300GS Vario Side Pannier strap eyelet replacement with skidpads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

BMW R1300GS Vario Seitenkoffer Ersatz der Gurtösen durch Gleitpad, falls die Ösen nicht benötigt werden

Ocena
0 / 5
Polubienia
2
Pobrania
22
Wydruki
0
Wyświetlenia
224
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

BMW R1300GS Vario Side Pannier strap eyelet replacement with skidpads in different colors, if you dont like the original black ones or dont need eyelets at all.

The skidpads on the title picture are printed in PETG Galaxy Silver 

Mounting instructions

Remove the original strap eyelets by loosening the two screws per eyelet with a Torx 20 bit. Mount the 3d printed skidpads using the original screws, tightening torque 6Nm

Printing instructions

  • These are recommendations based on testprint results (Prusa Slicer)
  • PETG or ASA (tested only with parts printed with PETG filament)
  • 0.4 nozzle
  • 0.2mm Structural
  • no supports
  • infill 20% 
  • fill pattern 3D Honeycomb

Tagi