Wall Mounted Army Painter Stackable Holder v1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Army Painter Holder for one paint bottle. Stacks with itself in rectangular and checkered patterns
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a small paint holder for those who buy paints on “as needed” basis - you can print and add one slot in your paint storage in under 30 minutes. The whole tapestry of these modules can be hung and moved to your paint station or to the storage where your paints are kept
It is assembled using bamboo skewers or some other axle that's 3 mm thick or thinner.
Run axle through the printed holes and align the modules. If axle is too thick you can drill out the hole - just make sure you have enough wall thickness before you do and increase number of wall loops as needed.
Hanger loops can be mounted on the top row to hang the tapestry somewhere - feel free to remix the files as needed - STEP files are included to make it simpler. Outer radius of the mount is 10.75mm, inner is 3.2mm and width of the module (and half-width of the bottle holder) is 14mm