The holder protect glass and cover for screen Ender-3 V3 SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The holder protect glass and cover for screen Ender-3 V3 SE
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 320
- Wydruki
- 4
- Wyświetlenia
- 1020
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
0.2mm layer height, 15% infill, without support
You can enable the option “Make overhangs printable”
Protective glass cut from 3mm thick acrylic (it can use thinner, but there will be a gap under the holder)


Insert the glass into the groove. No need to glue.
You should end up with something like this:

Put it on the screen (It is not necessary to turn off and remove the screen)

Back side:

An open lid may create an obstruction.

Therefore, insert pieces of filament (or whatever you like) into the holes as a cover stop.

There are two more models to choose from: glass holder only or cover only
_______________________________________________________________________________________