99% 3D Printed Pocket Knife Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
99% 3D printed pocket knife. Designed for fidgeters who can't stop flicking things open.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 638
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
CAUTION: THIS IS NOT A REAL KNIFE! THIS IS A COSPLAY TOY! DO NOT USE IN PUDLIC!
The design was made to satisfy my “always flicking something” needs. 99% 3D printed, easy to scale up or down. You do need plastic safe glue. You will need a 2mm screw for the blade pivot. You can use glue instead of a screw if you want to, but I find the model to last longer with a screw.
Dimensions and Specifications:
Open Length~7.46in
Blade Length~2.7in
Handle Length~4.18in
Blade Thickness~0.15in
Handle Thickness~0.42in
Closed Length~4.3in
Blade Material~PLA
Handle Material~PLA
Blade Shape~Sheepsfoot
Deployment Options~Front & Back Flipper
Assembly should be fairly straight forward, don't glue things that move. I marked the spots you need to glue with a red dot.
You will have to bend the liner lock using a lighter or some other means of heating up plastic. Heat ONLY the section boxed until it is movable, then bend the plastic about ¼ of an inch away from the handle. This will allow the lock to function as a spring, pushing itself into the blade.
The blade works best when printed in the orientation shown below.
Enjoy! Please let me know if you would rather have more hardware used or a completely 3D printed version. I have more designs coming soon so keep an eye out ; )