SV08 BTT HDMI5 v1.2 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an improved version of Mommel's case for the HDMI5 1.2
- Ocena
- 4,5 / 5
- Polubienia
- 7
- Pobrania
- 94
- Wydruki
- 2
- Wyświetlenia
- 571
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
With the original model, I had many issues, like the three buttons not reaching the ones mounted on the screen and the frame not fitting into the case because the two locking tabs wouldn't pass between the screen and the side walls
I decided to modify it adding some material behind the buttons to make them closer to the screen so they could be clicked, and then I added two slimmer locking tabs on the sides of the case to keep it still compatible with the original frame (which in my opinion is too far from the screen and forms a big gap underneath the fame)
And this is why I made my own frame, now it slides inside the case, it sits right against the screen, and has no locking flaps, tabs, or whatever you wanna call them, it should fit and stay in position without anything but if it doesn't or you want to be safer, you can do like me and put a couple of tiny strips of double sided tape on the top and bottom and stick it to the black frame of the display
PRINT SETTINGS:
Print the model oriented with the flat part down with the two tabs touching the buildplate and use supports
Material: PLA
Layer height: 0.32
Scarf Joint: Contour and hole, scarf joint around the entire wall
Wall order: In/Out/In
Precise Wall: On
Support: Tree Organic painted ONLY on the whole bottom and under the three buttons (see picture)