"Sakura" Pictinny rail fixed stock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixed 8" LOP "tailhook" styled stock for Nerf and Airsoft use, using minimal hardware, remix of Crush stock.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 475
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
“I miss my wife, Tails” - Dr. Robotnik
This is Sakura, a remix of the crush pictinny rail stock, designed to fit onto a 180^3mm print bed and to provide a minimalistic third point of contact for your nerf blaster or airsoft replica.
Featuring
- 8" fixed Length of pull
- Optional quick detach functionality from using chances QD stock base
- Open source files, with STEP included
Hardware and assembly notes
This stock needs:
4x m3x8 bolts
and either*
2x m3x30 bolts and two pen springs (For QD crush stock unit)
OR
2x m4x25 bolts plus 2x m4 nuts (For fixed stock unit)
The stock rod part may be a tight fit depending on print tolerances, and accordingly, may require a mallet or sanding to fit smoothly.
Closing notes
Please do not even think about putting this on a GBB or worse a real steel firearm, it was in no way designed to withstand ANY recoil forces.
NONE of my files are to be used or sold by Frontline Foam, by downloading my files, you agree that you are not Frontline Foam and/or related to Frontline Foam or Derrikk Sun.