10" Homelab Rack Open USB Drive Bay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10" Homelab Rack Open USB Drive Bay to hold 2x USB Drives (or other components!)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to suit my own needs alongside other models I've uploaded on Printables
** NOTE: These Rack components were designed to fit a HOME MADE rack using rack rails and my supports to build a home made rack, therefore they may not fit your own store bought rack if you went down that path without a little modification - please check before printing. The designs are 250mm wide with a space between the upright rails being 220mm. Although some models within the range are slightly less than the 220mm. Please check before printing.
Designed to hold 2x Seagate OneTouch Drives with some space at the side of the drive to tuck some excess USB cable inside the frame.
I've printed all mine in PETG (Galaxy Black) with 15% infil, no brim on the 1U Blade and organic supports on models that need it.