Mini Rosso C40
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mini version of my bigger C40 racecar.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 320
- Wydruki
- 2
- Wyświetlenia
- 1111
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY!
THE ROSSO C40 MINI is a mini version of my C40 racecar.
SIZE / WEIGHT:
Total assembly: Roughly 85 x 40 mm
Filament: We used roughly 20 g of filament using 5% infill.
MAKEABLE FOR EVERYONE:
Largest single part: 85 x 40 mm
Almost no supports: The only recommended support is on the wheel pins.
Snap together: Simply press the wheels on!
RECOMMENDED SETTINGS:
Resolution: 0.2 mm layerheight
Infill: 5%
Supports: Yes, only needed on the wheel pins!
Brim: Not mandatory.
SUPPORT:
Incase of any problems or questions please contact us via a private message on here, or over on Instagram or via email: [email protected]
Feel free to share your makes with us on Instagram and tag us using @stllabs
(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)