4x2 Gridfinity Deburring Tool & XActo Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4x2 gridfinity bin for a Libraton deburring tool and an XActo knive with some spare blades each
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original model does not fit on the A1 Mini print bed, because the A1 mini only fits at max 4x4 Gridfinity units. So I got rid of one of the two blade containers, moved some things around, remodelled the xacto spare blade box slot with grip dents and made the slots for the head of the xacto blade a little wider towards the grip, because my cap did not right fit in and removed most of the collar on the deburring tool's slot in the head area, because my libraton deburring tool did not fit there. Then I put all of that in a new 2x4x3 box, that even is stackable and has notches to prevent smaller boxes from sliding around on this one.
As a bonus I added tapped magnet holes to the underside.
Swipe the deburring blades on their base to rotate them free.
I used 3x2m magnets, but they weren't listed, so I picked 3x1mm for the BoM. Keep in mind, that while they hold the spare blades in place, the tools will only take them as a suggestion.
The gridfinity base will take up to 2x4x4=32 6x2mm magnets. Most likely one per corner, so 4 in total would be sufficient.