Gridfinity 12ml paint tube holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Gridfinity-compatible bin for storing 12ml paint tubes cap-down, such as those commonly sold by Action.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Stores 8 tubes of 12ml paint cap-down. Fits tubes whose cap measures a taper of 11mm to 12mm, such as those frequently sold by Action. The bin is 2 units wide, 1 unit deep, and 3 units tall.
No supports needed for printing; I printed mine with PLA+ at 10% gyroid infill and it's more than strong enough. Printing time was about 2.5 hours on my Sovol SV06.
Note that the original Gridfinity license is MIT and no license is specified for the parametric base model; I have selected CC-BY as the closest equivalent that is available to choose from here.