AI_Conan

Project: AI_Conan.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x125mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.7mm and the Actual Depth is 2.8mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA 3DHoJor Blue Grey Transmission Distance: 2.4
PLA 3DHoJor Blue Transmission Distance: 2.9
PLA Sunlu Red Transmission Distance: 4.1
PLA BambuLab Basic Orange Transmission Distance: 7
PLA Bambu Brown Transmission Distance: 2
PLA Sunlu White Transmission Distance: 5.9
PLA Sunlu Cyan Transmission Distance: 0.1
PLA Sunlu Yellow Transmission Distance: 6
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 10 unique filaments， other brands of filaments with similar TD should work as well.

Swap Instructions （for one AMS):
Start with Black (Slot1)
At layer #7 (0.64mm) swap to Blue Grey (Slot2)
At layer #11 (0.96mm) swap to Blue (Slot3)
At layer #12 (1.04mm) swap to Red (Slot4)
Pause at layer #14 to allow color swap at Slot1, 2, and 3
Slot1: Black --> Orange
Slot2: Blue grey --> Brown
Slot3: Blue --> White
At layer #15 (1.28mm) swap to Orange (Slot1)
At layer #16 (1.36mm) swap to Brown (Slot2)
Pause at layer #17 to allow color swap at Slot4
Slot4: Red --> Cyan
At layer #18 (1.52mm) swap to White (Slot3)
At layer #19 (1.6mm) swap to Cyan (Slot4)
At layer #20 (1.68mm) swap to White (Slot3)
Pause at layer #25 to allow color swap at Slot 1, 2 and 4
Slot1: Orange --> Red
Slot2: Brown --> Yellow
Slot4: Cyan --Beige
At layer #26 (2.16mm) swap to Red (Slot1)
At layer #27 (2.24mm) swap to Yellow (Slot2)
At layer #28 (2.32mm) swap to White (Slot3)
At layer #31 (2.56mm) swap to Beige (Slot4) for the rest.